|
Title: Tires and Rims Post by: Sentinel on May 16, 2004, 12:48:52 am Tire and Rim Reviews
Title: Re: Tires and Rims Post by: GSXRBOBBY on June 06, 2004, 08:46:16 pm I have become a big fan of Chip Foose and after seeing and finding out he is making and/or selling custom rims I have been looking into them.
Title: Re: Tires and Rims Post by: leapyear on October 17, 2007, 08:39:29 am Hello, looking for info on refinishing original 14' aluminium rims.
approx price $ location - (ottawa area) Thanks Title: Re: Tires and Rims Post by: dguy on October 17, 2007, 09:15:13 am Hello, looking for info on refinishing original 14' aluminium rims I paid $50/pair a couple of years ago to a NAPA dealer with a small machine shop to use a chemical stripper followed-up by media blasting. I re-cleared them myself with a clear wheel enamel available off-the-shelf at CTC. If you keep the car on the road once the mighty chemical plows are spreading their filth, I have no idea how that enamel will hold up to the salt. A generic clear which I had tried earlier on wintered rims had pitted quite badly by the end of the season. :-\ Title: Re: Tires and Rims Post by: dguy on October 17, 2007, 09:36:49 am Speaking of tires...
Toyo Proxes T1-R A nice sticky tire during the warmer months, surprisingly confident on pavement which is anything between damp to covered in standing water. On loose surfaces don't expect them to be much different from an inexpensive all-season tire. Give 'em time to warm up in cooler weather before playing, particularly around 15° or lower. They will develop overnight flat spots at these temps, as well as be slightly loose. The flat spots will usually run out after 5 minutes or less at highway speeds; use caution when cornering agressively--in cool conditions it's relatively easy to break loose a pair of 255's while accelerating out of a corner with a well-used 2.8. |