Ottawa Fiero Club Forum

General => Mods => Topic started by: lsixtyseven on April 09, 2006, 05:50:45 pm



Title: Belt squeal
Post by: lsixtyseven on April 09, 2006, 05:50:45 pm
The damn belt has been squealing since last year, finally it really got to me this year . I was planning on the Rodney Dickman fix, but I built my own instead. Installed it today and squeal is gone, hopefully it will stay like that.


Title: Re: Belt squeal
Post by: dguy on April 10, 2006, 07:40:35 am
If you have a 2.8 and it doesn't squeel, the belt is either 5 minutes old or it's been over-tightened.  ;)

I'm guessing that's just an off-the-shelf idler pulley, and a homebrew bracket which mounts on over top of the water pump studs?


Title: Re: Belt squeal
Post by: lsixtyseven on April 10, 2006, 11:45:40 am
It bolts up to the alternator bracket beside the water pump, if you go to rodneys site you will  see a pic of how he does, I did it the same way only cheaper.


Title: Re: Belt squeal
Post by: PBJ on April 10, 2006, 09:39:05 pm
How is the 87GT running?  Any recient pics?  Is the drivers side still two tone red??

Pete


Title: Re: Belt squeal
Post by: lsixtyseven on April 10, 2006, 11:26:54 pm
It's running pretty good, the door is still a different color, in time I will get to it. I will probably hit 300,000 km this year. Plans for an engine swap have to wait, life hasn't exactly worked out to my benefit, at least I'm still driving the fiero. O0


Title: Re: Belt squeal
Post by: dguy on April 11, 2006, 09:01:33 am
It bolts up to the alternator bracket beside the water pump, if you go to rodneys site you will  see a pic of how he does, I did it the same way only cheaper.

Nice.  The last time I saw photos of Rodney D's piece, they were in-car and I couldn't tell how it was mounted.

How much fiddling was involved to align the pulley?


Title: Re: Belt squeal
Post by: lsixtyseven on April 11, 2006, 08:43:53 pm
I have no patience so anything I do, gets done with plenty of swearing. This would probably be an easy mod for you Don, you seem to have patience. It's not perfectly aligned but it's still working, I could  probably align it better but it's holding so I will see how long it lasts.


Title: Re: Belt squeal
Post by: FieroBUZZ on April 11, 2006, 09:04:16 pm
How is the 87GT running?  Any recient pics?  Is the drivers side still two tone red??

Pete

 O0    ;)  ;)  ;)  ;)  ;)  ;)  ;)

Gee, Pete, you never ask about my GT.......  ::)
Gary


Title: Re: Belt squeal
Post by: PBJ on April 11, 2006, 10:59:54 pm
Sorry Gary,  I hope your car(s) are coming along, and going back together :)  Maybe we will hook up at a Ottawa/TO/London getogether.

Pete