|
Title: In-seat speaker Post by: c-l on July 21, 2006, 02:28:12 pm Can anyone tell me: 1 - The dept limitation for the 3 1/2 speakers installed in the seats. 2 - What is their impedence 3 - Are the seat cloth easy to tear when removed Thanks Title: Re: In-seat speaker Post by: MacPhail on July 21, 2006, 02:55:40 pm Original speakers were 3.25" diameter and 1.5" deep (3.5" rounds work).
Cheers, Derek Title: Re: In-seat speaker Post by: FieroBUZZ on July 22, 2006, 03:05:36 pm If you trim a bit more foam 4" fit as well. I have 4" Legacy speakers.
The seats are pretty tough (but a bit old). If you take them apart and wash them, put some tape (I used iron on seam mender) on the back where the speaker holes are. This will keep them from fraying and making holes. I think Mr Mike's has a how to on cover removal on his site mrmikes.com I have some in bits and pieces if you need any pictures. I have hog rings and pliers as well. If you take them apart just cut the old hog rings for easy removal and you can put new ones in. Gary p.s. I have some old factory ones if you have a broken one and want a stock replacement. Title: Re: In-seat speaker Post by: c-l on July 22, 2006, 06:08:44 pm Gary... yes, yes, yes... hog ring and pliers are welcomed... tried to find them at local CT and autoparts but no one has them O0 MacPhail... Went shopping today and 3 1/2 inch Rockford Fosgate it is. Thanks guys!!!! Claude |