|
Title: A LITTLE TROUBLE... Post by: juggalojesus87 on April 13, 2007, 11:23:02 pm went to install the new rodney dickmen idler pully and didnt quite read directions as well as i should have due to frustrations (wife) and the engine mount shifted and my engine dropped slightly and now my oil pan in sitting on the mount a little. i tried lifting the engine up from underneath but cant get the engine to lift back up or the mount to turn back. any ideas? :'(
Title: Re: A LITTLE TROUBLE... Post by: FieroBUZZ on April 14, 2007, 07:32:52 am It may be snagged on something, as it should lift up. Use a block of wood to avoid denting the oil pan and be gentle. An engine hoist would be prefered, though.
A cherry picker can usually be found very inexpensively and is invaluable. If you have a bit of space to store it (folded up), it's really worth it. p.s. You could jack up the engine and use the picker to fasten to your wife and suspend her in an out of the way spot while you work. >:D Title: Re: A LITTLE TROUBLE... Post by: lercs on April 14, 2007, 06:33:48 pm i dont know if they still do it, but canadian tire used to rent engine hoists
Title: Re: A LITTLE TROUBLE... Post by: juggalojesus87 on April 16, 2007, 09:01:00 pm fixed it ;D
Title: Re: A LITTLE TROUBLE... Post by: FieroBUZZ on April 16, 2007, 09:43:33 pm Car or wife >:D O0
Title: Re: A LITTLE TROUBLE... Post by: juggalojesus87 on April 17, 2007, 03:52:22 pm both >:D
|