|
Title: Rimzzzzzz<3 Post by: Church on February 23, 2011, 06:37:48 pm Looking to purchase 18x10 with a +20 Offset for the rear and 18x9 with +20 Offset as well! Just wondering what I'd have to do to make them fit other then installing spacers/adapters. Feel free to smack down some jokes.. ;)
Title: Re: Rimzzzzzz<3 Post by: c-l on February 23, 2011, 06:52:06 pm ....Feel free to smack down some jokes.. ;) Would pretty much be a mandatory requirement to fit the spacers/adapters to a car ;D Title: Re: Rimzzzzzz<3 Post by: aaron88 on February 24, 2011, 12:13:19 pm offset isn't enough. Those wheels are going to stick way out. You'll have to put on a fender kit to widen your body (the car not you).
You'll also need a coil over kit for the rear. What car are those wheels you have listed for? Title: Re: Rimzzzzzz<3 Post by: Church on February 24, 2011, 04:12:29 pm offset isn't enough. Those wheels are going to stick way out. You'll have to put on a fender kit to widen your body (the car not you). You'll also need a coil over kit for the rear. What car are those wheels you have listed for? They're supposed to be for a 350Z, I am aware that I'd need a bore adapter as well with the spacers/adapters. Would you mind linking me to a fender kit and the rear coil over kit? It would be much appreciated. Thanks so much for the quick reply as well! Greatly appreciated! :) Title: Re: Rimzzzzzz<3 Post by: dguy on February 24, 2011, 07:00:38 pm Small diameter coil-overs are largely a DIY project - have a look at this link for a taste of what's involved: How to make rear coil-overs using factory struts, with pics. (http://www.fiero.nl/forum/Forum2/HTML/046456.html)
I think you'll find that flared fenders are largely a DIY project as well, but don't quote me on that. Title: Re: Rimzzzzzz<3 Post by: can machine on February 24, 2011, 07:53:38 pm You are probably better off with different rims. It's going to be alot of work to make them fit.
Title: Re: Rimzzzzzz<3 Post by: Church on February 25, 2011, 12:20:45 pm Small diameter coil-overs are largely a DIY project - have a look at this link for a taste of what's involved: How to make rear coil-overs using factory struts, with pics. (http://www.fiero.nl/forum/Forum2/HTML/046456.html) I think you'll find that flared fenders are largely a DIY project as well, but don't quote me on that. Any links for Fender Flares? :) Title: Re: Rimzzzzzz<3 Post by: aaron88 on February 25, 2011, 12:37:05 pm You can try doing a search on PFF. I'll do a quick one.
http://www.fiero.nl/forum/Forum3/HTML/000082.html http://www.fiero.nl/forum/Forum1/HTML/067740.html http://www.fiero.nl/forum/Forum3/HTML/000095.html http://www.fiero.nl/forum/Forum3/HTML/000060.html Also check out this thread: http://www.realfierotech.com/phpBB/viewtopic.php?f=3&t=17389 That should get you started. Not sure who the IMSA manufacturer is but that's a good place to start looking. Good Luck. Title: Re: Rimzzzzzz<3 Post by: Church on March 06, 2011, 10:19:27 pm Thanks a lot :D I think I'll wait for some used IMSA rear fenders to pop up on PFF!
|