|
Title: need 3800 s2 +trans and some Post by: Gizmo on June 01, 2012, 01:09:25 pm Montana needs a new engine and trans but after some measuring, the N* idea is out. Well, not without some hackery to force everything to clear. As it usually happens, just threw a lot of new parts in the van and the timing of the head gasket was perfect. >:( The slipping tc lockup I was living with just fine...manual control and tdh fluid.
Looking for, preferably from a 2nd gen w-body....engine, trans, cradle, wiring and pcm. Don't care if its na or sc, either will do. Needs to be cheap and still have some life left. Title: Re: need 3800 s2 +trans and some Post by: can machine on June 01, 2012, 09:04:10 pm I've got a free tranny, but it needs to be rebuilt.
Title: Re: need 3800 s2 +trans and some Post by: Gizmo on June 02, 2012, 04:17:02 pm I've got a free tranny, but it needs to be rebuilt. Thanks, will keep that in mind. I just don't have the time to tinker around, hoping to find something complete I can just bolt in and go. Title: Re: need 3800 s2 +trans and some Post by: Dan on June 02, 2012, 04:31:04 pm Series III 3800 N/A engines go for about $600 to $1,000 a piece down this way with the trannies being an extra $300 to $400. Series II 3800N/A's go for around $500 and series II 3800 SC's around $600 and up depending on mileage.
Some times you can get a better package deal depending on the wreckers. Dan |