Ottawa Fiero Club Forum

General => General Chat => Topic started by: FieroBUZZ on April 10, 2003, 07:03:36 pm



Title: Member roll call !!!
Post by: FieroBUZZ on April 10, 2003, 07:03:36 pm
Almost time to start the summer season.  :'(

There seem to be a lot of new members and it is often easier to put together a face and name with the car. In that vein, let's take a roll call with what we are (or hope to be) driving.

1986 GT rebodied as an SE
Soon to get 3800 in (hopefully)
said motor to run (hopefully)
multi-coloured, mostly gold
yes, it is crappy!

Gary


Title: Re:Member roll call !!!
Post by: Fieroflyer on April 10, 2003, 08:02:43 pm
Dan
1985SE, red with soon to be installed  3800SC series II engine with 3.4 inch super charger pulley, aftermarket ECM and 4T65E HD tranny. Possible other mods to follow. Toy.
1984SE, red with original 2.5L and 4:10 4speed. Daily driver.


Title: Re:Member roll call !!!
Post by: Boy-z on April 10, 2003, 09:12:11 pm
Karl...A.K.A. Boy-z
1987 G.T.Black hi flow exhaust
Racing Chip
Cold Air Intake PORT AND Polished throttle body and Plenum PLus numerous other stuff....2.8

.......DO  ME 7.....


Title: Re:Member roll call !!!
Post by: JetJumper on April 10, 2003, 09:42:51 pm
Chris
2m4  STOCK all the Way. (Except for NEON's :P)
oh and the new Duke Engine..  ::)
Pic under my name


Title: Re:Member roll call !!!
Post by: FieroDough on April 10, 2003, 09:45:58 pm
Eric,
Car: Dragg-On  8)
engine: 3800sc Series 1 with some special goodies.  ;D
Color: Prowler Purple
16" TSW Blades

Car2: Betsey.
85 GT with either 3.4L or 4.9 Carbed V8 (depends on my mood this summer)
Color: Black, soon to be Maaco Black  :-X


Cheers!
Eric


Title: Re:Member roll call !!!
Post by: fiero1 on April 11, 2003, 09:45:24 am
Claude (Fiero1) ;D

 1985 GT
 2.8  4 SPD.
 BLACK


Title: Re:Member roll call !!!
Post by: dguy on April 11, 2003, 11:26:13 am
1985 2M6 SE summer-only toy that competes with my motorcycle
  • Mostly original "Fiero Red", with a dirty faded-to-pink roof.
  • Front-mounted battery, including custom 2x4 hold down. ;D
  • Koni adjustable struts in rear, cheapie Munroe shocks up front. :P
  • Poly bushings from nose to tail (in progress, stalled pending the arrival of new pivot bolts for the rear control arms). :'(
  • Gradual appearance of Mr. Mike's leather interior, thanks to my wife.  :)


Title: Re:Member roll call !!!
Post by: Andrew on April 11, 2003, 03:04:53 pm
Andrew
1984 2m4 SE
Black
Pure Stock


Title: Re:Member roll call !!!
Post by: WillEV on April 11, 2003, 03:07:28 pm
1986 Fiero GT
Auto, sunroof, P-options
needs paint,exhaust and cat
anyone have a spare exhaust....


Title: Re:Member roll call !!!
Post by: Boy-z on April 11, 2003, 03:19:20 pm
regard the exhaust once I get my new system next week why have I heard that before. I will have a complete exhaust from the y pipe back including the tips which are welded on and there is no problems with it so willev it your if you have a 2.8 it is off my 87


Title: Re:Member roll call !!!
Post by: ddroger on April 11, 2003, 10:56:33 pm
This is a nice idea, but I thought the "members" icon was the path for member profiles.

"Oh! you mean its out-of-date & broken?" he said snidely. "oh well - band-aids are better than bleeding to death!"


Don Roger

'86 carburetted (!) Iron Duke 5 speed with unique 308 Stinger roadster bodywork (& a sticking front caliper.)

Its RED of course


Title: Re:Member roll call !!!
Post by: fiero308 on April 12, 2003, 08:10:09 am
Graeme here; pronounced Gray - em for any who might not be sure; (it has been 'murdelized' in the past);
I have an 85 that was a 4 cyl; now a 2.8 4 spd with a 308 kit body swapped on and ALL kinds of shoddy workmanship to overcome. Probably hints at the maintenance too.........
Plans - I have a 5 spd and turbo charger (2 actually) and intercooler; numerous other parts; intend to put in the camaro 3.4, turbocharged and also do a number of other things to make it handle as best as possible but still be manageable on the street. 8) ;) ;D
NEXT?????


Title: Re:Member roll call !!!
Post by: Sentinel on April 12, 2003, 02:22:03 pm
84 2MX 3.1 SFI(JOY!!!!)

85 Motionless Out of Date and Broken 2M4


Title: Re:Member roll call !!!
Post by: Rebel on April 13, 2003, 02:28:00 am
  FieroRebel     84 2m4 se Red stock working on a 3800 doner car still in the workings (fingers crossed )just pic up a mustang spoiler hoping to mod it to fit may have to change hood to a v6 hood with out the rack on it . :-*



Title: Re:Member roll call !!!
Post by: 87se_fiero on April 13, 2003, 07:16:41 pm
Etienne

87 SE, 2.8l, standard shift, maroon color with gray interior. Car was originally slated to be converted to electric but I enjoyed the acceleration of the 6 cyl waayyy too much ;D. Sitting in the garage needing a new exhaust system to replace the muffler-less (noisy) performance exhaust in order to pass the emissions test...


Title: Re:Member roll call !!!
Post by: Capt Fiero on April 14, 2003, 12:54:37 am
I am the new guy, I am in BC Canada.   www.westcoastfieros.com   my personal page is www.david.westcoastfieros.com my car is an 85GT  with a .040 over 2.8 that equals 2.9   engine mods are simply a lot.  9.5-1 compression, 280 duration cam, Full MSD 6al ignition, lowered 2"  225/50/15 tires, and tons of other mods.  Here is a quick pic

(http://www.david.westcoastfieros.com/members/car083002/PICT0018.jpg)

If any of you are going to be in the BC area on June 7th.  www.arlington.westcoastfieros.com


Title: Re:Member roll call !!!
Post by: WillEV on April 14, 2003, 05:03:08 pm
regard the exhaust once I get my new system next week why have I heard that before. I will have a complete exhaust from the y pipe back including the tips which are welded on and there is no problems with it so willev it your if you have a 2.8 it is off my 87

Hey if you have no use for it any more,I would be glad to get it from you.


Title: Re:Member roll call !!!
Post by: fiero308 on April 14, 2003, 05:31:05 pm
Gee.  Things look greener in BC.  And we volunteered to live in the snow, right?  gonna think about that one a bit.....
Nice car, David; and nice mods too.
Not showing mine till I have accomplished something.  Thatis my little incentive now.  But I'm workin' on it...   ;)


Title: Re:Member roll call !!!
Post by: PBJ on April 26, 2003, 05:36:26 pm
Hey, though I would chime in too.

86 GT Copper
Fuel injected Caddy 4.9 V8 Turbo with water injection, 4T60 shift kit and 3.33 f/d
Sunfire GT seats with lumbar, 97 Firebird dash.
Grand Am/Beretta brakes, rear sway bar.

Pete


Title: Re:Member roll call !!!
Post by: x-thumpr-x on April 26, 2003, 11:57:52 pm
Adam  a.k.a. x-thumpr-x
V.P. of GTA Fiero Club

Fiero 1:  85GT black  4spd daily driver
              Aftermarket stereo and 87SE gauges

Fiero2: 84 red sport coupe with rare 3.32 econo tranny  :o
            no engine right now, either V8 or parts car (pending) :'(

Fiero3: hopefully 87GT by the first week of May (pending) this will decide
            fate of the 84        



Title: Re:Member roll call !!!
Post by: fiero308 on April 29, 2003, 09:51:47 am
hi PBJ
watched some of your accomplishments on Pennocks (in awe) and look forward to seeing your car someday.
I assume the firebird dash is all done? Any final notes or maybe a pic for our forum?
I am particularly interested in the turbo'd 4.9!?!?!?!  Where did you find space for it, or is the turbo relegated to the passenger seat.........  or trunk space....
I will be quite interested in seeing that whenever; if you have a pic or two maybe you could forward one?  I am doing a 3.4 turbo and am always looking for ideas.
thx and welcome to our board!!! ;)
gp