Welcome, Guest. Please login or register.
Did you miss your activation email?
January 08, 2025, 12:53:09 pm
Home Help Search Login Register

Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: The fun of finding parts. « previous next »
Pages: 1 [2] Go Down Print
Author Topic: The fun of finding parts.  (Read 5987 times)
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision
« Reply #15 on: August 30, 2005, 11:24:50 am »
What about me and Wednesday?

Aaron

.
Logged
Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
coolman_890
Guest
« Reply #16 on: August 30, 2005, 11:35:43 am »
sorry i was out of town all last week. if anyone else needs the headliner let me know
Logged
GoFast88
Guest
« Reply #17 on: August 31, 2005, 07:58:16 am »
Thanks to Aaron who picked up the liner for me in Carleton Place. I also picked up the 3M 8088 glue @ Ralphs UAP on Bank for $25 tax included.
The cleaning of the backing board starts tonight.
« Last Edit: September 08, 2005, 08:03:19 am by GoFast88 » Logged
GoFast88
Guest
« Reply #18 on: September 26, 2005, 12:30:30 pm »
Got 2 guys to give me a hand to put it on Friday pm and the job went quickly without incident. Used up the whole can on the 2 surfaces in a x-pattern. Haven't got enough to do the fold over back but will use contact cement as it will be on the back side anyway. Once the rain quits on Thursday I will (might) find the time to actually put it up  Lips Sealed
Logged
GoFast88
Guest
« Reply #19 on: October 04, 2005, 07:59:13 am »
Got the headliner up on Saturday. I had read up on the installation for some time and figured that I had all of the angles figured. Well, I cleared the outside of the moulding and put them up. Now I see that I have a small black smudge on the headliner. I guess that I should have cleaned the BACK of the mouldings, as the windshield tar must have touched the headliner as I put it up. I mention it here because I saw no mention of it elsewhere in my readings on the subject.
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision
« Reply #20 on: October 04, 2005, 09:56:46 am »
Good point; tar is hard to get out, but there are thinners that will do the trick.
Logged
Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
GoFast88
Guest
« Reply #21 on: October 04, 2005, 11:31:57 am »
Won't they "melt" my precious headliner though??  Undecided
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision
« Reply #22 on: October 05, 2005, 12:27:45 pm »
Don't know, but you do have some spare pieces to test?
Logged
Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
GoFast88
Guest
« Reply #23 on: October 05, 2005, 12:45:02 pm »
Unfortunately I tossed out the majority of what I had. I have some small 1 inch pieces (if I can find them) Anyone out there had experience with cleaners on headliners? (search on Pennocks came up empty.)
Logged
Pages: 1 [2] Go Up Print 
Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: The fun of finding parts. « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!