Welcome, Guest. Please login or register.
Did you miss your activation email?
December 28, 2024, 03:15:03 am
Home Help Search Login Register

Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: FS: Near-OEM 14" alloy rims + tires « previous next »
Pages: [1] Go Down Print
Author Topic: FS: Near-OEM 14" alloy rims + tires  (Read 1688 times)
dguy
Global Moderator
OFC Post-a-holic
*****
Offline Offline

Posts: 2598


Got vacuum. Want boost.


« on: October 14, 2006, 08:32:03 am »


Likely from a Sunbird from the same era as the Fiero, we have four alloy rims (including tires) which we no longer need:
  • 14" diameter;
  • 6" wide;
  • +42mm offset (approximate);
  • 5x100mm bolt circle.

The rims have been stripped, media-blasted, and freshly clear coated.

They fit the front of any pre-88 Fiero just fine.  Depending upon the type of balancing weights used and the brand of struts installed, they seem to fit the rear of some pre-88s but not others.  Installing a 5mm spacer between the hub and the rim takes care of any clearance problems.

The tires are Pacemark Radial G/T.  One pair of 205/60R14 with ~4mm tread depth, one pair of 215/60R14 with ~5mm tread depth.

$25 per pair.
« Last Edit: October 14, 2006, 08:48:47 am by dguy » Logged

1984: Track car project.
1985 SE: Dead 2.8, stalled L67 swap.
dguy
Global Moderator
OFC Post-a-holic
*****
Offline Offline

Posts: 2598


Got vacuum. Want boost.


« Reply #1 on: October 16, 2006, 09:14:45 pm »

Sold.
Logged

1984: Track car project.
1985 SE: Dead 2.8, stalled L67 swap.
Pages: [1] Go Up Print 
Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: FS: Near-OEM 14" alloy rims + tires « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!