3.4L CAM. Witch one??

[FieroDough]

ok. can anyone give me an aswer on this? people from PFF keep loading me with tons of useless info.

What cam do I put in the 3.4L that is best out of these 2.. stock 3.4L cam from Camaro or 2.8L cam from Fiero?

thanks!
Eric

[Shaun41178]

They both suck.  But if you have to choose one go with a stock fiero cam.  It has slightly more intake lift.

Dont know why you want to go with such a small cam though.

The Crane 260 cam is one of the best ones for making power.  Why do a swap if you aren't going to make anymore power??

If you dont' have to worry about emissions, or have a good cat, go with the Crane 272.  Big lift and duration.  You won't be dissapointed.

Shaun

[FieroDough]

They both suck.  But if you have to choose one go with a stock fiero cam.  It has slightly more intake lift.

Dont know why you want to go with such a small cam though.

The Crane 260 cam is one of the best ones for making power.  Why do a swap if you aren't going to make anymore power??

If you dont' have to worry about emissions, or have a good cat, go with the Crane 272.  Big lift and duration.  You won't be dissapointed.

Shaun

it's an eduro car.. I don't want to invest in the cam and new lifter right away.. I'd have to redo the whole valve train. This way i can just reuse the Fiero cam/lifters.

I won't feel so bad if I slam the car into a wall on the fist lap then.

Cheers!
Eric