Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
January 11, 2025, 09:50:11 am
Ottawa Fiero Club Forum
|
General
|
General Chat
| Topic:
MCO Instructional Lapping Day
« previous
next »
Pages:
[
1
]
2
Author
Topic: MCO Instructional Lapping Day (Read 4012 times)
34FieroGT
Ottawa Fiero Member
Fiero Know-it-all
Offline
Posts: 210
This, is my BOOMSTICK!!!
MCO Instructional Lapping Day
«
on:
March 02, 2004, 05:57:16 pm »
Everyone,
The MCO is planning on holding an instructional lapping day on July 2nd this summer. Last year's organizer is requesting all interested parties to contact him regarding their interest in attending. His email is as follows:
Quote
Subject: Hello Lappers
The MCO Winter Driving Schools will be over soon, and summer is not that far away.
The planning has already started on the MCO Instructional Lapping Day for 2004. We have secured Friday July 2nd at Shannonville, which leads into MCO's Ted Powell Summer Trophy Race Weekend. Most of the people that helped me last year have already volunteered for 2004.
I have not crunched the numbers yet, but should be able to hold the line on costs, and still give you more than enough track time. More details will be available towards the end of March, but I do not see any major changes.
What I need to know from everyone that participated last year, is whether you and friends are interested in this years Lapping Day, hopefully by early March.
Bennett Leckie
Organizer MCO Lapping Day 2004
H 613-258-0348
Email
leckierb@magma.ca
As the email states, the costs should be close to what they were last year. As I recall, it was about $150 for the day. Anyone interested should contact Bennett at the address specified in his email.
I had an absolute blast at this event last year and am planning on attending again. Pictures from last year can be found in the gallery at the following location:
http://www.fierodrivers.com/forum/gallery/view_album.php?set_albumName=smp1
You can also read up on my experiences from last year:
http://www.fierodrivers.com/forum/index.php?board=9;action=display;threadid=631
Hope to see you there!
Logged
tyler...
aaron88
Ottawa Fiero Member
OFC Post-a-holic
Offline
Posts: 1642
Kempvision
Re:MCO Instructional Lapping Day
«
Reply #1 on:
March 02, 2004, 07:08:25 pm »
Would they let me on the track with my northstar?
How early March are we talking here, my car may not be ready.
Aaron
.
«
Last Edit: March 02, 2004, 07:13:54 pm by aaron88
»
Logged
Your only limitations are set from within, by a lack of vision. But to have vision alone leaves the process idle. Ergo, without action your thoughts are worthless.
GoFast85
Guest
Re:MCO Instructional Lapping Day
«
Reply #2 on:
March 03, 2004, 07:28:08 am »
Hoping that my ride will be ready by then.
Logged
34FieroGT
Ottawa Fiero Member
Fiero Know-it-all
Offline
Posts: 210
This, is my BOOMSTICK!!!
Re:MCO Instructional Lapping Day
«
Reply #3 on:
March 03, 2004, 08:06:08 am »
Aaron,
The track day is actually scheduled for July 2nd, so you should have plenty of time to get your car ready!
Bennett is just looking for people to contact him regarding their interest in attending by early March.
I can't see why they wouldn't let you on the track with the N*. There is a minor technical/safety inspection that all cars must pass before they will be allowed on track. It's mainly just to ensure that the car will hold up. As long as the car is good condition mechanically, you shouldn't have a problem.
Logged
tyler...
GoFast85
Guest
Re:MCO Instructional Lapping Day
«
Reply #4 on:
March 03, 2004, 09:50:15 am »
Where do I pay my money
Logged
34FieroGT
Ottawa Fiero Member
Fiero Know-it-all
Offline
Posts: 210
This, is my BOOMSTICK!!!
Re:MCO Instructional Lapping Day
«
Reply #5 on:
March 03, 2004, 05:23:08 pm »
Contact Bennett to inform him of your interest. This event is still in the planning stages but will more than likely take place. They ran out of spots last year before the cutoff date. Payments will more than likely start getting collected starting in April. You'll have to contact Bennett to be sure.
Logged
tyler...
GoFast85
Guest
Re:MCO Instructional Lapping Day
«
Reply #6 on:
March 04, 2004, 09:40:58 am »
I got website 404
http://www.mco.org/forum/topic.asp?TOPIC_ID=1548
What is the e-mail address for Bennett?
Logged
34FieroGT
Ottawa Fiero Member
Fiero Know-it-all
Offline
Posts: 210
This, is my BOOMSTICK!!!
Re:MCO Instructional Lapping Day
«
Reply #7 on:
March 04, 2004, 10:54:25 am »
Bennett's email address can be found in the first post of this topic...
To save you a bit of time, I've included it with this reply:
leckierb@magma.ca
Logged
tyler...
GoFast85
Guest
Re:MCO Instructional Lapping Day
«
Reply #8 on:
March 04, 2004, 12:52:07 pm »
I must be going blind. A good canidate for lap day
Logged
dguy
Global Moderator
OFC Post-a-holic
Offline
Posts: 2598
Got vacuum. Want boost.
Re:MCO Instructional Lapping Day
«
Reply #9 on:
March 06, 2004, 09:26:15 am »
Stupid question: what is "MCO"?
Logged
1984:
Track car project.
1985 SE:
Dead 2.8, stalled L67 swap.
34FieroGT
Ottawa Fiero Member
Fiero Know-it-all
Offline
Posts: 210
This, is my BOOMSTICK!!!
Re:MCO Instructional Lapping Day
«
Reply #10 on:
March 06, 2004, 12:08:03 pm »
Don Guy: There's no such thing as a stupid question, only stupid answers...
MCO: Motorsport Club of Ottawa ->
www.mco.org
Logged
tyler...
dguy
Global Moderator
OFC Post-a-holic
Offline
Posts: 2598
Got vacuum. Want boost.
Re:MCO Instructional Lapping Day
«
Reply #11 on:
March 08, 2004, 08:49:20 am »
Thanks Tyler.
I sent a number of questions off to Bennett over the weekend. For all who are interested but haven't got up off their butts and e-mailed him, he said that details for the event should be posted at
http://www.mco.org/
some time after their next Executive meeting on March 16th.
Logged
1984:
Track car project.
1985 SE:
Dead 2.8, stalled L67 swap.
34FieroGT
Ottawa Fiero Member
Fiero Know-it-all
Offline
Posts: 210
This, is my BOOMSTICK!!!
Re:MCO Instructional Lapping Day
«
Reply #12 on:
April 05, 2004, 08:33:43 am »
Guys,
Due to internal politics in the MCO, Bennett has asked me to request everyone who is interested in this lapping day to attend the MCO's monthly general meeting this Tuesday. The meeting details can be found here:
http://www.mco.org/forums/topic.asp?TOPIC_ID=2558
The issue is as follows: The lapping day is a prelude to an entire weekend of racing, and the road racers don't want us to have the friday for lapping. They would rather have the friday for testing. Bennett would appreciate any and all support possible at the meeting this Tuesday (April 6th) to convince the MCO executive and event organizers to give us the day for lapping. Hope to see you there!
Logged
tyler...
dguy
Global Moderator
OFC Post-a-holic
Offline
Posts: 2598
Got vacuum. Want boost.
Re:MCO Instructional Lapping Day
«
Reply #13 on:
April 05, 2004, 09:39:33 am »
Nuts. 7pm + meeting + an hour's driving each way + 5:00am wake-up call on wednesday = can't make it.
If anyone else is going tomorrow night, mind voicing my support by proxy?
Logged
1984:
Track car project.
1985 SE:
Dead 2.8, stalled L67 swap.
34FieroGT
Ottawa Fiero Member
Fiero Know-it-all
Offline
Posts: 210
This, is my BOOMSTICK!!!
Re:MCO Instructional Lapping Day
«
Reply #14 on:
May 06, 2004, 10:22:19 am »
This event is a go! You can read up on the details at:
http://www.mco.org/school/lappingschool.htm
The cutoff date for the early bird registration is rapidly approaching. If you're planning on attending this event, make sure that you get your payment in before May 15th. Hope to see you there!
Logged
tyler...
Pages:
[
1
]
2
Ottawa Fiero Club Forum
|
General
|
General Chat
| Topic:
MCO Instructional Lapping Day
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> General Chat
=> Mods
=> Project Work Logs
=> Pictures
=> Sightings
=> Product/Service Reviews
-----------------------------
Buy/Sell/Trade
-----------------------------
=> Parts
=> Sell your Car
=> Non-Fiero
-----------------------------
Off Topic
-----------------------------
=> Other
=> Jokes
Powered by SMF 1.1.18
|
SMF © 2013, Simple Machines
Loading...