Welcome, Guest. Please login or register.
Did you miss your activation email?
January 12, 2025, 09:57:37 pm
Home Help Search Login Register

Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: CHRFAB 288 Cams , Retainers and springs « previous next »
Pages: [1] Go Down Print
Author Topic: CHRFAB 288 Cams , Retainers and springs  (Read 3018 times)
Slammed Fiero
Guest
« on: July 08, 2005, 11:41:42 am »
Going a Different Route..

288 Cams from CHRFAB (75hp over stock)
Retainers
Hi Rev Springs
and Cam Gears

$900 for the whole Shhh---bang. CDN Dollars.

jmccreery@buddssubaru.com


JM
86 GT N* 32V V8 , Nitrous , 5spd , ...ect.
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision
« Reply #1 on: July 08, 2005, 12:10:59 pm »
I’m interested, but I’m not sure I have the money to spend right now.  Let me look into it.

What is this other way you are planning on going?  If you don’t mind me asking.

Aaron

.
Logged
Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
Slammed Fiero
Guest
« Reply #2 on: July 08, 2005, 02:05:44 pm »
Well to be honest , I have too many projects. I got the car running really well and it's very enjoyable. I have a direct port nitrous setup for the car. I think it would get tot he point that with nitrous and cams I would be doing nothing but grenading trannies.

I picked up a 66 Corvair 2 weeks ago from Scottsdale Arizona , Car has all heim jointed suspension , Koni's The car is 100% Rust Free , 0 bondo. I am building a Blow through 2.9 Ltr FLat 6 for it.. I would rather put the $$$ towards that car then dump more into the Fiero.

I also have the Z06 Corvette injectors you will need to feed the cams They flow 28Lbs @ 43Psi.

JM
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision
« Reply #3 on: July 08, 2005, 03:05:15 pm »
are those injectors an exact swap or will I have to change the fuel rail (injectors longer or shorter)?

They are about the right flow rate.
Logged
Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
Slammed Fiero
Guest
« Reply #4 on: July 08, 2005, 05:16:04 pm »
Direct Swap , I bought them based on Alans suggestion. They are brand new.
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision
« Reply #5 on: July 11, 2005, 05:07:17 pm »
How much for everything including the injectors?

I have to buy a house in the fall and I’m getting married in the fall, so I don’t think I’m going to be able to spare the cash, but I’m going to try really hard.  If all goes well and you haven’t already sold the package, I’ll take it when and if I can.

Sorry for the sketchy response.


Aaron

.
Logged
Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
Shaun41178
Guest
« Reply #6 on: July 11, 2005, 06:00:41 pm »
See if you can sell the ported heads and cams and injectors as a package.  Its a lot of money for one person to shell out, but if you want to make power you have to spend the money not just talk about spending themoney.  But hell its worth about 100 hp or so.  gotta think of dollar per hp ratio.

Put it up on ebay if it comes to that.  I am sure someone on there will buy it.  Have 3 auctions but combine shipping if its the same person.
Logged
aaron88
Ottawa Fiero Member
OFC Post-a-holic
******
Offline Offline

Posts: 1642


Kempvision
« Reply #7 on: July 12, 2005, 08:53:35 am »
It’s not really about spending the money, because I have the money, it’s about spending the money right now.  I know I shouldn’t but I might anyway.

Aaron

.
Logged
Your only limitations are set from within, by a lack of vision.  But to have vision alone leaves the process idle.  Ergo, without action your thoughts are worthless.
Slammed Fiero
Guest
« Reply #8 on: July 12, 2005, 10:32:56 am »
Cams, gears , injectors , springs and retainers.

$1000.
Logged
Pages: [1] Go Up Print 
Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: CHRFAB 288 Cams , Retainers and springs « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!