Well, lots of people have problems wiring. That's why some guys get jobs making swap harnesses. This explains why......................
From a thread on pin removal on PFF:
For other's reference
1 - Pull off the blue or clear cover
2 - With your right hand finger nail pull back the plastic 'finger' that is holding the pin in place.
3 - Now with your other right hand move the pin slightly away from the center piece - it also has groves that hold the pin in place
4 - Now with your left hand gently pull the pin out backwards past the seal by tugging on the wire.
It would appear that the buggers making harnesses have an extra right hand.
Next time someone sees Dan, have him hold up his hands and see if he looks like a fork.
Author