3800sc check list

[FieroDough]

Hey guys! Here is my check list of 3800sc swap parts. Let me know if I'm missing anything.

1 fiero   (check)
1 3800SC Series 1 (check)
1 ECU for above engine and harness
1 95'Camaro 3800 Flywheel grind down to fiero flywhell thikness. (check)
1 "Custom" engine mount (not check, still looking)
8 Custom flywhell bolts (not check, but know were to go.. )
2 Coolant hoses (not check, yet to measure)

#? Misc heater hoses. (buying a small roll of heater hose, check)

2 Fuel lines. (Not check, but I have a good idea there)

SET of solid cradle bushings (not check, but must check )
1 Clutch, (not check, still looking.. )
2 Long welding cables for battery relocation (not check)
1 Battery tray for battery relocation. (make my own, check )

anything else?

cheers!
Eric

[fiero308]

hey Eric
I saw a good idea for a battery relocation; it used a starter relay close to the battery so that the big lead was only hot to the starter when actually starting and not at all times. It can also be worked in as a passive theft device I guess.
that way you don't have to worry about physical damage to the cable all the time etc etc.
Just a thought. I will be doing that one; battery tray is shot and gone and so a relocation is a natural.
 

[Sentinel]

a set of adult depends for first launch.