Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
January 12, 2025, 12:15:33 am
Ottawa Fiero Club Forum
|
General
|
General Chat
| Topic:
SHIFT PROBLEMS!!
« previous
next »
Pages:
[
1
]
Author
Topic: SHIFT PROBLEMS!! (Read 3078 times)
Sentinel
Returns to active lurker status
Ottawa Fiero Member
MASTER FIERO
Offline
Posts: 621
Wrapped in Horsepower, Driving into Fury......
SHIFT PROBLEMS!!
«
on:
June 17, 2003, 07:31:20 pm »
OK here's the deal, feels like the tranny is stuck in 5th or something, all the linkage is ok but put it in first and starts ok but as soon as the clutch is let all the way the car suddenly starts jarring violently and tach goes crazy? Idea's
Logged
We drive so fast , it seems as though , we take into the sky, the Fiero Machines in Harmony , Hear the Engines Cry
FieroDough
Guest
Re:SHIFT PROBLEMS!!
«
Reply #1 on:
June 18, 2003, 10:16:28 am »
Hummm.. linkage out of adjustment?
are you hittig reverse ok?
Keep me posted,
Eric
Logged
Boy-z
Guest
Re:SHIFT PROBLEMS!!
«
Reply #2 on:
June 18, 2003, 10:24:43 am »
Check you fluid level.
Logged
Sentinel
Returns to active lurker status
Ottawa Fiero Member
MASTER FIERO
Offline
Posts: 621
Wrapped in Horsepower, Driving into Fury......
Re:SHIFT PROBLEMS!!
«
Reply #3 on:
June 18, 2003, 06:14:27 pm »
Reverse is fine, and fluid is fine, I notice the enginge got warm real fast(coolant temp fine) just by going around the block. When I start it cold I'm ok for about half a block. Then whenever the clutch is released all the way starts bucking like a sonofa.... same in second, I can limp home by riding the hell out of the clutch. The revs also jump around like mad. O2 sensor? coil? vaccuum?I'm just not too familar with the 3.1 engines and getting Fiero withdrawl something fierce........
grumble, cuss word, sonofa mother
,.......
also the clutch is brand new
«
Last Edit: June 18, 2003, 06:25:55 pm by Sentinel
»
Logged
We drive so fast , it seems as though , we take into the sky, the Fiero Machines in Harmony , Hear the Engines Cry
Fieroflyer
Guest
Re:SHIFT PROBLEMS!!
«
Reply #4 on:
June 18, 2003, 09:05:17 pm »
Am hoping to be in Ottawa some time this weekend will let you know for sure when I know. Then will take a look at her for you. Dan
Logged
dguy
Global Moderator
OFC Post-a-holic
Offline
Posts: 2598
Got vacuum. Want boost.
Re:SHIFT PROBLEMS!!
«
Reply #5 on:
June 19, 2003, 08:13:09 am »
In other words, she idles ok, but will barely run when under load?
Logged
1984:
Track car project.
1985 SE:
Dead 2.8, stalled L67 swap.
FieroDough
Guest
Re:SHIFT PROBLEMS!!
«
Reply #6 on:
June 19, 2003, 11:54:08 am »
that is a sign of running lean....
Logged
Sentinel
Returns to active lurker status
Ottawa Fiero Member
MASTER FIERO
Offline
Posts: 621
Wrapped in Horsepower, Driving into Fury......
Re:SHIFT PROBLEMS!!
«
Reply #7 on:
June 19, 2003, 07:29:42 pm »
yea the engine runs like a dream, as soon as there is load it gets all crazy, if you've every had your torque conver lock up, something like that except quite a bit more harsh bucking, I've head the Pilot bushing mentioned(noooooo).
Eric, yea that's what I was thinking, but not sure if that's just from having to keep the revs so high to get around the block,when idling it doesn't get warmer faster or anything so my guess would be elec. it's ok, but we know my recent history on diagnosing Fiero's.....
Geez the service Dan gives.... now if I could only get that from Ford(HA yeah right) Don't go out of your way Dan, but if your around it would be appreciated, let me know.
«
Last Edit: June 19, 2003, 07:41:40 pm by Sentinel
»
Logged
We drive so fast , it seems as though , we take into the sky, the Fiero Machines in Harmony , Hear the Engines Cry
Rebel
Guest
Re:SHIFT PROBLEMS!!
«
Reply #8 on:
June 20, 2003, 08:10:58 am »
I i am a very simalar problem with my 2.5
personaly i chech 2 thing fuel pre....in for ignition failure
i pull the coil in check the plate i seen it on my 2.8 go i give very simalar as your getting
i would also check shift cable it may have slipped out of adjustment
hope you find it
have a good one
i think i have found my problem is a melted wiring harness
Logged
chris
Guest
Re:SHIFT PROBLEMS!!
«
Reply #9 on:
June 20, 2003, 08:40:06 am »
did this start when we had all the rain
Logged
dguy
Global Moderator
OFC Post-a-holic
Offline
Posts: 2598
Got vacuum. Want boost.
Re:SHIFT PROBLEMS!!
«
Reply #10 on:
June 20, 2003, 10:54:43 am »
Quote
yea the engine runs like a dream, as soon as there is load it gets all crazy, if you've every had your torque conver lock up, something like that except quite a bit more harsh bucking,
I'm with Eric--sounds like she's running lean, or starving for fuel when you start to make her work.
Personally the first thing I would go after is the fuel system, starting with the filter, then check out the fuel pump itself, all of the connections, p'raps even going as far as to check out the shraeder (sp?) valve on the fuel rail and the injectors themselves.
Other opinions may vary of course.
Hope this helps!
Logged
1984:
Track car project.
1985 SE:
Dead 2.8, stalled L67 swap.
Sentinel
Returns to active lurker status
Ottawa Fiero Member
MASTER FIERO
Offline
Posts: 621
Wrapped in Horsepower, Driving into Fury......
Re:SHIFT PROBLEMS!!
«
Reply #11 on:
June 21, 2003, 02:08:21 am »
Quote from: chris on June 20, 2003, 08:40:06 am
did this start when we had all the rain
nope was as dry as the Sahara
Logged
We drive so fast , it seems as though , we take into the sky, the Fiero Machines in Harmony , Hear the Engines Cry
Sentinel
Returns to active lurker status
Ottawa Fiero Member
MASTER FIERO
Offline
Posts: 621
Wrapped in Horsepower, Driving into Fury......
Re:SHIFT PROBLEMS!!
«
Reply #12 on:
June 21, 2003, 02:17:33 am »
Quote from: dguy on June 20, 2003, 10:54:43 am
Quote
yea the engine runs like a dream, as soon as there is load it gets all crazy, if you've every had your torque conver lock up, something like that except quite a bit more harsh bucking,
I'm with Eric--sounds like she's running lean, or starving for fuel when you start to make her work.
Personally the first thing I would go after is the fuel system, starting with the filter, then check out the fuel pump itself, all of the connections, p'raps even going as far as to check out the shraeder (sp?) valve on the fuel rail and the injectors themselves.
Other opinions may vary of course.
Hope this helps!
oh sure give me more to check out
Yeah there are just so many suspect options,,,,, damn it I actually thought of giving up all the cars cause I've had enough, I had it on the road for a total of 4 days and not one problem free day, but I've had a short fuse lately, this just help put me in one of the worst downers in a while.
Logged
We drive so fast , it seems as though , we take into the sky, the Fiero Machines in Harmony , Hear the Engines Cry
FieroDough
Guest
Re:SHIFT PROBLEMS!!
«
Reply #13 on:
June 21, 2003, 10:47:56 am »
I can come and visit.
Maybe 2 heads are better then one.
Logged
Sentinel
Returns to active lurker status
Ottawa Fiero Member
MASTER FIERO
Offline
Posts: 621
Wrapped in Horsepower, Driving into Fury......
Re:SHIFT PROBLEMS!!
«
Reply #14 on:
June 21, 2003, 04:44:39 pm »
Thanks for the offer, it seems I may of fixed the problem.... I changed the plugs and it isn't acting up now, whether it's fixed or just becoming an intermittent problem we'll see.....thanks for the help guys
Logged
We drive so fast , it seems as though , we take into the sky, the Fiero Machines in Harmony , Hear the Engines Cry
Pages:
[
1
]
Ottawa Fiero Club Forum
|
General
|
General Chat
| Topic:
SHIFT PROBLEMS!!
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> General Chat
=> Mods
=> Project Work Logs
=> Pictures
=> Sightings
=> Product/Service Reviews
-----------------------------
Buy/Sell/Trade
-----------------------------
=> Parts
=> Sell your Car
=> Non-Fiero
-----------------------------
Off Topic
-----------------------------
=> Other
=> Jokes
Powered by SMF 1.1.18
|
SMF © 2013, Simple Machines
Loading...