Welcome, Guest. Please login or register.
Did you miss your activation email?
November 01, 2024, 07:37:20 am
Home Help Search Login Register

Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: 2.8 and 4 spd package « previous next »
Pages: [1] Go Down Print
Author Topic: 2.8 and 4 spd package  (Read 1920 times)
fiero308
Guest
« on: June 29, 2003, 01:17:53 pm »

Since I have decided to do my whole package at once, including the 3.4 swap (all parts now arrived in my messy, heavily cluttered garage Lips Sealed ) I am  going to be getting rid of my 2.8 and 4 spd that are presently in the car.
I am hoping to find a home for them as soon as they come out.  If you see my garage you will know what I mean. Undecided
I am mentioning this first here; then will post in the GTA. I think ebay is a bit unrealistic for heavy items. Engine started and ran VERY well but needs clutch. Idled a bit high when cold but settled down and was very good once warmed up.  This is a COMPLETE engine package; manifolds and all.  It runs fine (exc clutch as noted) and should not need much attention I don't think.  It is simply a matter of space.  Or lack of it.

I could make it a whole cradle package if need be (and if I know sooner rather than later); cradle, struts and springs and axles and all if that works best for someone.  This will be coming out within the next month with luck and I can arrange/provide transporation, loading and unloading if that helps.  (Have a hoist and can borrow a van.... Cool)

Any interested parties please let me know; I am planning otherwise on selling the struts and springs and other parts separately and may ebay the trans as it is light enough for reasonable shipping.
Thanks  Smiley
Logged
fiero308
Guest
« Reply #1 on: June 29, 2003, 01:21:00 pm »

oh yes, I will also be selling the computer as well PLUS I have a spare computer for an 85 2.8 (got for backup...... Roll Eyes )  It will also include a lot of sensors and similar items; fuel pump as well.
Logged
Rob
Guest
« Reply #2 on: July 04, 2003, 02:42:21 pm »

How much do you want for the set?
Logged
fiero308
Guest
« Reply #3 on: July 06, 2003, 08:56:25 am »

hi Rob; I need to figure out what stuff you are and are not after.
so..........
you have a PM
Logged
Pages: [1] Go Up Print 
Ottawa Fiero Club Forum  |  Buy/Sell/Trade  |  Parts  |  Topic: 2.8 and 4 spd package « previous next »
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!